For that lived-in impression, a mature patina is created on the manufactured floorboards by repeated hand washing of the wood. Natural pigments, oils, resins and waxes ensure authenticity of colour and provide protection which aesthetically integrates any future marks into the wood.
2450 – 5000 mm
in steps of 500 mm
approx. 280 – 360 mm
in steps of 20 mm
approx. 19 mm (± 0,5 mm)
approx. 4.5 mm
Three-layer with swelling and shrinkage protection
Top layer: oak
Carrier: softwood
Original Schotten & Hansen surface: breathable, elastic, regenerative
Fire behaviour classification Cfl - s1 according to EN 13501-1:2010
Chemical resistance according to EN 13442:2023-04, method A+B: predominantly no visible changes
Adhesive quality JAS 240:2003 (JAS II): Conditions fulfilled
Slip resistance EN 16165:2021-10 Annex B: Class R9, Annex D: Floor system suitable for unrestricted use
Footstep sound EN ISO 10140-3:2021-09: 15 dB
Formaldehyde emission according to EN 14342: Class E1, measured according to EN 717-1
Underfloor heating: Suitable for hot water or electric underfloor heating. Thermal conductivity λ [W/(m/K)]: Overall structure with oak veneer 0.13. Thermal resistance R [m²K/W]: Overall structure 0.15 (calculated according to EN 14342:2013)
VOC emissions according to AgBB scheme < 1 mg / m³
Easy to clean with Schotten & Hansen care products
Schotten & Hansen wood products are recyclable according to the waste wood regulation category A2 and can therefore be reused for the production of wood-based materials.
Short length share up to 10 %.